From Concept to Reality

The Packaging Validation Lab

A sample is not just a freebie; it is an engineering tool. We provide comprehensive prototype kits to help you validate compatibility, functionality, and consumer experience before mass production.

Request Validation Kit

How to Audit Your Sample

Receiving a sample is only the first step. To ensure your product launch succeeds, we recommend performing the “Golden Soar 5-Step Stress Test” immediately upon receipt. This protocol mimics real-world supply chain conditions.

Vacuum Leak Test

Place filled bottles in a vacuum chamber at -0.06MPa for 5 minutes. Check for leakage. This simulates air travel.

Drop Test

Drop the filled sample from 1.2 meters onto concrete (3 angles: base, side, cap). Check for cracks.

Compatibility Oven Test

Store filled samples at 45°C for 4 weeks. Check for “panelling” (sucking in) or material degradation.

Pump Priming

Count how many pumps it takes to dispense product. Standard is 3-5 strokes.

Torque Check

Verify application torque and removal torque to prevent “back-off” during shipping.

Figure 1: PE Soft Touch bottles undergoing compression testing.

Figure 2: PP Jars ready for thermal stability testing.

Sample vs. Mass Production: The Specs

What you see in the sample is what you get in the container. We adhere to strict ISO tolerances. Use this table to benchmark the samples you receive against your specifications.

Parameter	Standard Tolerance	Testing Method
Weight (Grammage)	± 1.0g	Precision Scale
Overflow Capacity (OFC)	± 2.0ml	Water Weight Calculation
Dimension (H/W)	± 0.5mm	Digital Caliper
Neck Inner Diameter	± 0.2mm	Plug Gauge
Color Match (Delta E)	< 2.0	Spectrophotometer

Curated Sample Kits

We don’t send random items. Based on your project inquiry, our engineers curate a specific “Validation Kit”. Here are common components:

Virgin PET

For Clarity

Aluminum

For Barrier

Tinplate

For Industrial

Silicone

For Squeeze

See How It’s Made

Your sample comes from these exact production lines. Transparency is part of our prototyping promise.

▶

Video: High-speed automated assembly line.

Validation FAQ

Do you offer 3D printed prototypes? +

Yes. If you are designing a custom mold, we can provide SLA (Stereolithography) 3D printed prototypes within 72 hours. This allows you to check ergonomics and size impression before cutting steel molds.

Can I get samples with my logo? +

For logo validation, we offer “Pre-Production Samples” (PPS). This involves making actual print plates or silk screens. There is a setup fee (usually $100-$300), which is fully refundable against the mass production order.

How many samples can I request? +

Our standard validation kit includes 2-5 units per SKU. This provides enough units for you to perform destructive testing (drop test) and non-destructive testing (marketing photos) simultaneously.

Ready to Validate?

Request your engineering validation kit today. We ship globally via FedEx/DHL.

Submit Request

← Back to Support Center